Instructions
Surface treatment: The wall should be dry, flat, firm and free of oil, with a moisture content of less than 10% and a pH value of less than 10; the putty should be strong, water-resistant and crack-resistant.
New cement wall
(1) New concrete needs 30 days to dry.
(2) Remove loose materials and crystallized salts.
(3) Fill cracks and holes with appropriate fillers.
(4) Apply one coat of optimized A+ multi-purpose primer.
Exterior wall putty
(1) After the putty is completely dry, use fine sandpaper to smooth it and remove powder.
(2) The putty should be strong, water-resistant and crack-resistant.
(3) Apply one coat of optimized A+ multi-purpose primer.
Moldy surface
(1) Rinse with a high-pressure water gun.
(2) Dilute household bleach at a ratio of 1:10 and wash the wall. After it dries for 24-48 hours, rinse it with clean water. After it is dry, apply a coat of Optimized A+ Multi-Purpose Primer.
Technical Parameters
Ingredients: Acrylic copolymer, pigment, filler, additive, and water.
Gloss: Matte
Theoretical Coverage: Approximately 8-10 m2/kg (one coat, based on a dry film thickness of approximately 30 μm)
Drying Time: Touch Dry: 30 minutes (at 23°C and 50% relative humidity)
Hard Dry: 2 hours (at 23°C and 50% relative humidity)
Recoat Time: 4 hours (at 23°C and 50% relative humidity)
Water Washability: Excellent
Volume Solids: Approximately 35%
Flash Point: Not Applicable
Specific Gravity: Approximately 1.24
Durability: Excellent
Construction Instructions
(1) Read the instructions before use.
(2) Stir the can after opening it.
(3) Add the appropriate amount of water according to the instructions, do not over-dilute, and stir thoroughly.
(4) Avoid excessive paint on the paintbrush or roller.
(5) Clean tools immediately after use.
(6) Do not pour diluted paint back into the original packaging.
