Service Hotline
400-1899-133
Professional water-based acrylic matte interior wall paint, infused with special anti-mildew ingredients to effectively prevent mildew formation.
Product Specifications : 20/25 kg/barrel
Product Usage : It is suitable for use on interior walls of various large and small projects, such as: finely decorated residential areas, hotels, office buildings, etc.
For size customization, technical support, latest quotes, etc.,
please click online consultation or call 400-1899-133
Surface treatment: The wall should be dry, flat, firm and free of oil, with a moisture content of less than 10% and a pH value of less than 10.
Interior wall putty
(1) After the putty is completely dry, use fine sandpaper to smooth and remove the powder.
(2) The putty should not be too soft, but should be firm, water-resistant and not crack.
(3) Apply one coat of optimized series interior wall primer.
Powdered surface
(1) Remove loose powdered dust.
(2) Apply one coat of optimized series interior wall primer.
(3) If the wall is severely powdered and loose, it is recommended to completely scrape it off and apply new interior wall putty.
Mouldy surface
(1) Remove mold.
(2) Dilute household bleach at a ratio of 1:10 and wash the wall. After it dries for 24 to 48 hours, rinse it with clean water. After it is dry, apply the optimized series interior wall primer again.
Ingredients: Acrylic copolymer, pigment, filler, additive, and water. Gloss: Matt.
Theoretical Coverage: 6-8 m2/kg (one coat, based on a dry film thickness of approximately 30 μm).
Drying Time: Touch Dry: 1 hour (at 23°C and 50% relative humidity). Hard Dry: 4 hours (at 23°C and 50% relative humidity).
Recoat Time: 4 hours (at 23°C and 50% relative humidity).
Volume Solids: Approximately 39% (varies depending on color).
Flash Point: Not Applicable.
Specific Gravity: Approximately 1.5 (varies depending on color).
Durability: Good.
(1) Read the instructions before application.
(2) Stir the paint after opening the can.
(3) The actual coating rate varies depending on the substrate, application temperature, application method, and color.
(4) Add an appropriate amount of water according to the instructions. Do not over-dilute the paint and stir evenly.
(5) Avoid excessive paint on the paintbrush or roller.
(6) Do not pour diluted paint back into the original packaging.
